Phasor K3-7.0kW Marine Diesel Generator

Phasor K3-7.0kW Marine Diesel Generator

Standard Equipment

• Kubota Diesel Engine
• Single Bearing Direct Coupled Generator
• ± 1% Solid-State Voltage Regulation
• Low 1,800 RPM Operating Speed
• Safety Shutdown System for High Coolant Temperature or Low Lube Oil Pressure
• Single Series Circuit Control System with No Printed Circuit Boards – Tinned Wiring
• Fresh Water Double Pass Heat Exchanger
• Water Cooled Exhaust Manifold with Removable Integral Cupro-Nickel Heat Exchanger Core
• Zinc Anode in Heat Exchanger
• Stainless Steel Exhaust Elbow Cast
• Gear Driven Raw Water Pump
• Four Point Isolation Mounts S/S
• Molded Blue Silicone Water Hoses with Stainless Steel AWAB Clamps
• Air Intake Cleaner / Silencer
• Spin-On Lube / Fuel Filters
• Secondary 5 Micron Fuel Filter
• Self Bleed Fuel System
• USCG Approved Fuel Lines
• Electric Fuel Transfer Pump
• Forged Brass Oil Drain Valve with Safety Lock
• Awl-Craft 2000 Urethane Finish
• 5 Year Limited Warranty
• Circuit Breaker - Single Phase
• Belt Guard

Specification

• Kubota Model D1005-E4BG
• Number of Cylinders 3
• Cubic Inch Displacement 61
• Fuel Consumption ( Gal/Hr ) Full Load 0.61 Half Load 0.32
• Electric End Linz
• Bore x Stroke 2.99" x 2.90"
• Dimensions (LxWxH) without enclosure 31.5" x 18" x 22.5"
•  Dimensions (LxWxH) with enclosure 35" x 22" x 25.5"
• Weight (lbs.) 567
• Output (volts) 120/240
•  Output (amps) 58/29
• Output (watts) 7,000 (7.0 KW) at 60 HZ / 5,500 (5.5 KW) at 50 HZ
•  Exhaust Dia. 2.0"
• Raw Water Dia. 3/4"
• Fuel Line Dia. 5/16"
•  Return Line Dia. 3/16"

Factory Warranty: 5 Years